Programming instructions and codes for Jumbo Remote Controls
Most Jumbo universal remote controls such as the Innovage, iWave, Emerson, Sentry RMC10 & RMC20, Harbor Freight 66687 and other generic "JUMBO" models use the same codes as the older RCA remotes with 3-digit codes.
There are some exceptions though, such as the Harbor Freight Tools Item 61959 and the QFX REM-115 for example, that come pre-programmed with newer codes, very similar to these 4-digit codes used in Philips remotes.
The set-up procedures for most older Jumbos are the same as RCA's, so only the basic 'Direct Code Entry' and 'Code Search' instructions are presented here. For the rest, see this page.
Direct code entry for Jumbo remotes
First, turn on your TV or other device. Refer to the code lists and note the first code listed for your brand.
Step 1: Press the "CODE SEARCH" button until the LED turns on and stays solid red. Release the button.
Step 2: Press and release the Device Select Control button for the device that you are programming ("CABLE", "TV", "VCR","DVD" or "SAT"). The LED will blink once, then remain solid.
Step 3: Enter the 3-digit code using the number keys. The LED will blink as each number is pushed. If LED turns off after entering the 3rd digit, the remote has recognized the code. If the LED flashes, the code is not recognized and you will need to repeat this procedure using a different code. Note: The remote may recognize the code but the device may not. You may need to try more than one code to get the device to function.
Step 4: Press the "ON/OFF" button. If the device turns off, press the "ON/OFF" button again. If the device turns on, and other common functions work as they should, you have found the correct code. If not, you will need to repeat this procedure using the next code listed for your brand.
Note:
- To program the newer 'Harbor Freight Tools' Item 61959 or any other Jumbo remote that has a "Mute" button instead of "Code Search" button, press and hold the desired Device Select Control button until the LED turns on and stays solid red, then enter the 4-digit code.
Code search for Jumbo remotes
First, turn on your TV or other device.
Step 1: Press the "CODE SEARCH" button until the LED turns on and stays solid red. Release the button.
Step 2: Press and release the Device Select Control button for the device that you are programming ("CABLE", "TV", "VCR","DVD" or "SAT"). The LED will blink once, then remain solid.
Step 3: Point the remote at your device and press and release the "ON/OFF" button. The LED will flash once each time you press the "ON/OFF" button. Keep doing this slowly until the device turns off. It may take up to a few hundred times to reach the correct code. When the device turns off, immediately press and release the "ENTER" button to store the code.
Step 4: Press the "ON/OFF" button and the device should turn on. This ensures that the code was properly stored in the remote for that device. Test all other buttons on the remote to verify that they work properly.
Notes:
- If no keys have been pressed for 15 seconds, the Code Search feature will automatically turn off.
- For the rest of procedures, (e.g., 'Code Retrieval') see our RCA howto page.
- To search for a working code for the newer Harbor Freight Tools Item 61959, the QFX REM-115 or any other Jumbo remote that has a "Mute" button instead of "Code Search" button, press and hold the desired Device Select button until the LED turns on and stays solid red, then press and release "CH+" repeatedly until the device turns off. When the device turns off, press "ENTER" to store the code.
Code lists for Jumbo remote controls
Most "Jumbo" remote controls use similar codes as old RCA remotes, so we'll list only a few common brands of TVs on this page.
See the full TV codelist for iWave, Innovage, 'Can you imagine', 'Harbor Freight' 66687 and other generic "JUMBO" universal remote controls here.
If you own a newer 'Harbor Freight' Item 61959, a QFX REM-115 or any other Jumbo remote that has a "Mute" button instead of "Code Search" button, consult the Philips 4-digit TV code list.
| Brand | TV Codes for Jumbo Remote Controls |
|---|---|
| Abex | 172 |
| Admiral | 001 173 191 211 |
| Aiwa | 196 196 |
| Akai | 002 |
| Alleron | 046 047 |
| AOC | 004 005 006 007 082 195 196 |
| Apex | 236 240 241 |
| Audiovox | 038 |
| Bell & Howell | 001 048 049 073 083 162 |
| Broksonic | 000 004 250 280 |
| Candle | 004 006 008 132 174 196 |
| Citizen | 004 006 008 016 038 105 132 171 196 |
| Colortyme | 004 006 010 196 200 |
| Craig | 038 |
| Curtis Mathes | 000 004 006 015 048 049 073 105 162 171 196 212 |
| Daewoo | 004 005 006 016 017 082 127 171 190 196 202 |
| Daytron | 004 006 171 196 |
| Emerson | 004 006 012 023 024 025 026 027 028 029 030 031 032 033 034 035 036 037 038 039 041 042 043 044 046 047 048 049 073 123 124 162 171 177 179 191 196 208 |
| Fisher | 048 049 051 073 162 180 |
| Fujitsu | 046 047 |
| Funai | 038 046 047 189 |
| GE | 000 003 004 006 022 052 054 055 064 087 100 164 165 166 167 168 181 196 203 212 213 233 |
| Goldstar | 004 005 006 012 019 056 057 058 082 155 156 171 172 196 |
| Grundy | 038 046 047 171 |
| Harvard | 038 |
| Haier | 216 217 |
| Hisense | 237 |
| Hitachi | 004 006 012 013 059 060 061 063 135 136 137 138 139 140 141 142 143 144 145 146 148 150 179 185 196 198 199 |
| Infinity | 062 130 |
| Jensen | 004 006 196 |
| JVC | 012 013 054 055 060 063 065 066 067 123 157 158 159 182 239 |
| Kenwood | 004 006 019 196 |
| KLH | 236 240 241 |
| KTV | 038 070 171 177 |
| LG | 005 082 |
| LXI | 000 006 048 049 062 071 072 073 100 109 130 162 181 196 203 207 212 233 |
| Magnavox | 000 004 006 008 019 062 068 069 075 076 077 088 130 131 132 133 134 183 196 219 235 |
| Marantz | 004 006 059 062 078 130 196 199 |
| Memorex | 001 005 006 046 047 048 049 073 082 083 162 191 196 |
| MGA | 004 005 006 019 022 051 064 079 080 082 196 |
| Midland | 054 055 151 171 172 181 |
| Mitsubishi | 004 005 006 019 022 051 064 079 080 081 082 125 135 196 |
| MTC | 004 005 006 082 105 196 |
| NAD | 006 071 072 109 136 185 196 207 |
| NEC | 003 004 005 006 010 082 196 200 |
| Nikko | 006 016 196 |
| Optimus | 136 185 |
| Orion | 030 035 191 208 |
| Panasonic | 003 054 055 062 109 130 170 214 350 351 |
| Philco | 003 004 005 006 008 012 019 062 068 069 075 077 082 088 130 132 134 183 196 |
| Philips | 002 003 004 008 012 019 062 068 069 075 076 086 087 088 130 132 134 167 183 196 |
| Pioneer | 004 006 090 091 092 136 179 185 196 |
| Prima | 238 |
| PROSCAN | 000 100 181 203 212 233 |
| Pulsar | 004 151 |
| Quasar | 003 054 055 070 109 170 214 |
| RadioShack/Realistic | 004 006 012 038 048 049 073 095 162 171 172 196 |
| RCA | 000 003 004 005 006 007 019 054 055 082 096 098 099 100 101 102 103 129 179 181 188 190 196 202 203 212 215 233 281 352 |
| Sampo | 004 006 171 172 196 242 |
| Samsung | 004 005 006 012 013 015 017 019 082 104 105 106 171 172 196 201 204 |
| Sansui | 191 208 282 |
| Sanyo | 004 048 049 073 080 107 162 169 180 196 |
| Scott | 004 006 012 024 035 038 046 047 196 |
| Sears | 000 004 006 013 019 046 047 048 049 051 063 066 071 072 073 100 109 110 162 180 181 189 196 203 207 212 233 |
| Sharp | 004 006 012 026 029 095 111 112 113 122 171 173 196 |
| Shogun | 004 196 |
| Signature | 001 083 173 |
| Sony | 002 205 216 218 |
| Soundesign | 004 006 008 038 046 047 132 196 |
| Supreme | 002 |
| Sylvania | 004 006 008 019 062 068 069 075 076 077 088 116 130 132 134 161 183 196 353 |
| Symphonic | 026 029 033 038 046 047 155 189 |
| Tatung | 003 |
| Technics | 054 055 |
| Techwood | 004 006 054 055 196 |
| Tera | 004 012 093 |
| TMK | 004 006 196 |
| Toshiba | 000 048 049 071 072 073 105 109 117 118 160 161 162 190 201 207 283 |
| Totevision | 171 |
| Victor | 066 182 |
| Vidtech | 004 005 006 196 |
| Wards | 000 001 004 005 006 019 024 033 046 047 052 062 068 069 075 076 082 083 087 088 095 119 120 130 134 166 167 173 183 196 212 |
| White Westinghouse | 000 001 190 191 |
| Yamaha | 004 005 006 019 082 196 |
| Zenith | 000 001 004 051 083 151 152 153 154 196 210 217 |
More Jumbo remote codes
Generic Jumbo remote codes (RCA 3-digit): TV codes, DVD, VCR, Cable, SAT, Audio and Combo codes
'Harbor Freight' Item 61959 & similar remotes (Philips 4-digit): TV codes, DVD, VCR, Cable, SAT, Audio, Combo codes
